Flight Controllers
The flight controller also commonly referred to as its acronym FC is the heart and brain of the multirotor aircraft. It is a small circuit board that has multiple connections and sensors built into it that detect movement and other user input commands. Using this data, it then controls the speed of the motors to make the craft move as instructed.
Nearly all flight controllers have basic sensors such as Gyro (Gyroscopes) and Acc (Accelerometer). Some FC includes more advanced sensors such as Barometer (barometric pressure sensors) and magnetometer (compass).
The FC is also a hub for other peripherals, such as motors, GPS, LED, buzzers and more.
The FPV drone flight controller changes at a rapid pace from a variety of manufacturers. The FC is becoming smaller, with more features integrated, and using better processors and hardware.
Diatone Mamba F722s
Diatone's Mamba series gives racers an edge in competition. The latest F7 processing technology means you can focus on flying, not on the limits of your equipment.
iFlight Beast F7 55A V2 AIO
The flight controller is recommended in the Ummgawd 2Fiddy. This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let's go! DJI Plug&Play plug and so many UARTs most people wouldn't even use em' all. Compatible to digital and analog FPV, onboard Barometer for possible long range flights and much more. Unleash the beast!
iFlight Beast F7 AIO V2
The iFlight Blitz is a mini 20x20 flight controller with an improved circuit design, better components, and lower electrical noise. The flight controller has many plug-and-play ports including DJI HD VTX Connector, GPS, Crossfire, and more. The flight controller has LED indicators for visual debugging. Paired with a 55A Blitz ESC makes this a power stack in a small package.
iFlight BLITZ Mini F7 V1.1
The iFlight Blitz is a mini 20x20 flight controller with an improved circuit design, better components, and lower electrical noise. The flight controller has many plug-and-play ports including DJI HD VTX Connector, GPS, Crossfire, and more. The flight controller has LED indicators for visual debugging. Paired with a 55A Blitz ESC makes this a power stack in a small package.
iFlight BLITZ Mini F7 V1.1 (Copy)
The iFlight Blitz is a mini 20x20 flight controller with an improved circuit design, better components, and lower electrical noise. The flight controller has many plug-and-play ports including DJI HD VTX Connector, GPS, Crossfire, and more. The flight controller has LED indicators for visual debugging. Paired with a 55A Blitz ESC makes this a power stack in a small package.
MAMBA F405 Mini MK2 Betaflight Flight Controller F25 20A 3-4S DSHOT600
The Diatone F405 Mini flight controller is tried and true. This has plenty of features for the needs of most freestyle quads with 2-4S input, a 5V/1A BEC, and dedicated LED and Buzzer pads.
Matek F411-WSE
Compact Flight Controller & BEC 5V Output Built-in 2-6S ESC 78A Current Senor For iNAV RC Drone Wing
Matek H743-WLITE Flight Controller
FC Specifications
- MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash
- IMU: ICM42688-P
- Baro: DPS310 (I2C2)
- OSD: AT7456E
- Blackbox: MicroSD card slot (SDIO)
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 13x PWM outputs(12+LED)
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 2x I2C
- 1x CAN
- USB/Beep Extender with Type-C(USB2.0)
- Dual Camera Inputs switch
- 9V(12V) for VTX power switch
- High-precision Current Sense, 220A range
- ADC VB2 voltage divider: 1K:20K
- ADC AirSpeed voltage divider: 20K:20K
MINI F7 (HD +OSD +VTX SWITCH) 20x20mm
- Input Voltage: 3-6s
- BEC: 5v/2A, 10V/3A (For DJI HD VTX)
- Main control: STM32F722
- Gyroscope: BMI270
- RAM: Onboard 16M
- OSD: Support
- Barometer: No
- Mounting pitch: 20x20mm
- Weight: 5.1g
- Firmware: TMOTORF7 (STM32F7X2)
- Connector: USB-C
T-Motor F7 HD 30x30 Flight Controller for DJI
The T-Motor F7 Flight Controller now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a 10V 2A BEC to power it.
T-Motor F722 Mini
T-Motor F722 Mini HD has max performance in a small package. Perfect for the 20x20 builds.