Matek F405-Wing-V2

Matek F405-Wing-V2

The Matek F405-Wing-V2 is a dedicated fixed-wing and VTOL flight controller built around the STM32F405 processor. Designed for ArduPlane and INAV firmware, it features 10 PWM outputs for servo and motor control, a built-in current sensor rated at 100A continuous and 220A peak, and three onboard BECs for powering FC, servos, and VTX independently. The V2 revision brings USB Type-C, an upgraded ICM42688-P IMU, DPS310 barometer, and increased current sensing capacity over the original F405-Wing. A popular choice for fixed-wing FPV builds, gliders, and VTOL aircraft requiring reliable long-range navigation support.

Specifications

ManufacturerMatek
Part StatusCurrent
Manufacturer Model #F405-Wing-V2
Release Year2023
Weight (grams)25
Input Voltage Range9–30 V
Mounting PatternCustom
MCUSTM32F405
Gyro / IMUICM42688-P
BarometerDPS310
OSD ChipAT7456E
Blackbox StorageMicroSD Card
UART Count6
PWM Output Count10
Supported FirmwareArduPlane, INAV
ArduPlane TargetMatekF405-Wing
INAV TargetMATEKF405SE
Battery (cell count)6S
Current Sensor100A continuous, 220A peak
I2C Ports2
USB ConnectorUSB Type-C
Servo Voltage Options5V, 6V, 7.2V
Dimensions (mm)54 × 36 × 13

Firmware

FirmwareVersionDownload
INAV6.0 or newerDownload
ArduPlane4.4 or newerDownload

Wiring diagram

Documents

Community notes

  • The board ships unsoldered.
  • The 5x Vx2 pads on the S5–S9 rails are dead pins. If you power servos on S5–S9 from the built-in Vx BEC, bridge the Vx2 pad to the Vx pad with a drop of solder.
  • The MS4525 airspeed sensor works on the I2C2 bus only.
  • Use a 5V active buzzer on the Buz- and 5V pads. Tone alarms aren’t supported on ArduPlane.

Where to buy

WikiFPV may earn a commission when you buy through these links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Check the store for current price and availability. Learn more

Updated on November 21, 2026